How long till you can walk on polished floorboards?

If you are in the market for new flooring, you have probably wondered how long till you can walk on polished floors. Walk on flooring is something that not all homeowners want to have. For some, it gives a certain feeling of luxury when they walk on high-end flooring like hardwood or marble, but for others, it feels too much like walking on concrete or parking lot floors. To avoid making this kind of mistake, learn how long you have before you can walk on polished flooring.

First, know that different types of flooring need different amounts of time to be ready for walking. You will need to walk on carpets or laminates for more extended periods before they can be walked on. Hardwood and marble floors only take a few short hours to prepare. Linoleum or tile floors, however, need at least three hours before they can be walked on. Even the most expensive flooring in the most costly houses cannot usually be installed within those three hours. Read further to learn more about affordable timber floor polishing.

How long till you can walk on polished floorboards

How long do polished floors take to dry?

It is recommended that you keep off the floor for at least 48 hours after the last coat of polish has been done, and then use the floor ‘gently’ for another 24 hours. Floor polish takes a while to dry and is usually done in 1-2 weeks.

This time frame is because flooring installation companies usually apply a sealant before installing flooring. A layer of this sealant remains on the floor after it has been sanded and polished. The sealant helps prevent water or moisture from seeping through. While some believe that it improves the lifespan of flooring, most flooring professionals recommend that owners get rid of it as quickly as possible.

Can you walk on newly installed hardwood floors?

It would help if you waited at least a day after your hardwood flooring has been installed before walking on it with socks. After a few hours, a water-based polyurethane finish dries fast, allowing you to walk on your flooring.

After the sealant is applied, you can begin to use your flooring. Although you might think that it is not long until you can walk on polished flooring, it’s important to remember that flooring, like any other type of hard surface, takes wear and tear. If you don’t remove the sealant, it will eventually become dull. The edges will start to be blurred, as well as chipping. And the entire thing will finally begin to look ugly. So you need to ensure that this happens as soon as possible.

As soon as the first signs of wear and tear appear, get rid of the sealant. Clean your floor using only soapy water. And then start applying the floor coating. 

Can you sleep in the house after staining floors?

Even though there are other rooms to sleep in, the house is not habitable for at least two days after the job is completed, and it is best to remain out for at least five days because of the fumes/off-gassing are not safe to breathe in.

Are floors sanding dangerous?

When inhaled, wood dust from sanding and buffing poses a significant health danger. Hardwood dust is generally more harmful than softwood dust, and it can cause eye and skin irritation, allergies, decreased lung function, asthma, and nasal cancer.

As long as your flooring has dried thoroughly after being cleaned, there is no need for you to apply another coat. If you must, do so when the surface still feels a little damp. But make sure that you only wet the area where you plan to walk. When the surface feels dry, apply another coat. This is to make sure that the flooring has dried thoroughly between layers of application.

Make sure that your flooring is smooth and flat. If there are cracks or divots, it is advisable to fill them before putting them on the coating. You can buy a variety of products to fill in the gaps in your flooring. This will help you make sure that you walk on polished flooring that won’t get damaged easily.

When do you know how long till you can walk on polished floorboards? 

The next question that you need to answer is about the type of flooring that you want. If you are going to use tiles, you should know if they are grouted correctly. Some people have the belief that grouting is essential, but it isn’t. Tiles are not grouted, so they are much more likely to get damaged over time. Also, if the tiles you buy aren’t that great looking, you might be better off purchasing some laminate flooring. For more information visit

How long till you can walk on polished floorboards? 

Many individuals like ceramic flooring because they are easier to keep clean. They’re also incredibly inexpensive, so you won’t have to spend a lot of money on them. If you want to put in a wooden floorboard, make sure you have a sturdy floor underneath it and many woodworking skills. Wooden flooring is available at most home improvement stores.

Wood floorboards can be purchased from most home improvement stores as well as online. There are also many different types of wood floorboards out there. Hardwood floorboard is the most expensive type of wood board, but it is also the most durable, and you will probably never have to replace it for a few years. It has a lovely rich feel to it and is also great if you have children. However, it can be loud and may cause some trouble walking over it with shoes because it is so heavy.

Some cheaper woods to use are linoleum or vinyl floorboard, which are more affordable than hardwood. Linoleum floorboards are easy to clean, though and don’t crack or break when walked on. Vinyl floorboards are also a cheap way to go as they are not as durable as linoleum, and you may have to replace them every couple of years, but they do have a nice elegant look to them.
If you wish to know more about floor polishing, you can contact us at Floor sanding and polishing in Sunshine Coast.


D.P Manning, C Jones, The effect of roughness, floor polish, water, oil and ice on underfoot friction:: current safety footwear solings are less slip resistant than microcellular polyurethane, Applied Ergonomics, Volume 32, Issue 2, 2001,

P. Wan-xi, Z. Xu, D. He-ping, L. Kai-fu, F. Zhi-cai and P. Wen-li, “Study on Ecological Management Mode of Finishing Technology of Wood Multi-layer Floor in China,” 2009 International Conference on Electronic Commerce and Business Intelligence, 2009, pp. 294-297, doi: 10.1109/ECBI.2009.78.

B. Suhardi, R. D. Astuti and A. T. Widodo, “Design of polishing tools for improving work posture in furniture industry,” Proceedings of the Joint International Conference on Electric Vehicular Technology and Industrial, Mechanical, Electrical and Chemical Engineering (ICEVT & IMECE), 2015, pp. 223-228, doi: 10.1109/ICEVTIMECE.2015.7496678.

Leave a Comment

Your email address will not be published. Required fields are marked *