How much to sand and polish timber floors?

Hardwood refinishing costs vary depending on your region, the type of floor, its current state, and (of course) its square footage, just like everything else in the home remodelling market. However, if you employ a professional to refinish your flooring, here are some ballpark figures.

Expect to pay $1.50 to $4 per square foot, or $340 to $900 for a 15-by-15-foot room, to thoroughly refinish a hardwood floor, including sanding down the top layer to bare wood putting several layers of new finish like polyurethane.

Expect to pay $3.75 to $5 per square foot, or $850 to $1,125, for a custom refinishing work that includes sanding the hardwood flooring and applying stains, water-based or oil-based finishes, and additional finishes like acid-cured finishes. For more information visit the best Floor sanding in Adelaide today!

How much to sand and polish timber floors?

How much does it cost to refinish wood flooring yourself?

If you want to do your flooring refinishing, you’ll need to rent an industrial drum sander for roughly $60 per day. To restore sanded hardwood floors, you’ll need to purchase dyes and sealants, which will cost between $125 and $225. The overall cost is determined by the number of square feet of hardwood flooring you are replacing.

While the DIY option sounds appealing, keep in mind that refinishing hardwood floors is not as simple as it appears. (sanding a hardwood floor with all of those hard-to-reach corners and baseboards doesn’t seem to be all that simple.) Even with machines that capture the majority of the dirt, refinishing hardwood floors may be a dusty, time-consuming job. (You will use a lot of sandpaper.) Keep in mind that before you begin refinishing wood flooring, you must remove any furniture, rugs, pianos, and wall units from the floor, which can be an arduous and backbreaking job. Then, during the sanding phase of a refinish, you must cover everything in your house to avoid it from being covered in sawdust, which will happen even if you screen off the refinishing area.

What to look for in an expert When choosing a hardwood refinishing contractor, you get what you pay for. While anyone with a sander can remove a floor’s top coatings, only a skilled refinisher can regulate the sanding process to achieve a smooth, even finish. It takes talent to apply stains without drips or lines between brushstrokes.

Benefits of Floor Sanding

  • Removes signs of wear and tear while also assisting in the reduction of pests in your home
  • Reducing the risk of splinters.
  • Increases the Sturdiness of the Floors Makes the Floors Easier to Keep Clean
  • Increases the home’s resale value

What Determines the Cost of Timber Flooring Sanding?

Sanding charges for wood floors are calculated per square metre. The majority of trades do not include stain or polyurethane sealers in their estimates. As a result, the cost of sanding a timber floor per square metre might range from $8 to $15.

How much does it cost to sand and refinish hardwood floors yourself?

Expect to pay a bit less than $500 per 275 square feet if you plan to DIY your hardwood flooring. The typical price range is from $1,000 to $2,400.

Renting sanding equipment and purchasing sanding pads, wood stains, brushes, and finish are all included in the overall cost.

Floor sanding and polishing or just timber floor polish?

Is it just a matter of polishing your floor or sanding, staining, and refinishing it? You must understand the difference in pricing and outcome. Both approaches strive for a similar product, but the process is very different in reality.

Timber floor polish helps to ‘revive’ your floor by filling up minor scratches and evening out the appearance. While it restores the appearance of your floor, it does not solve scratches in the long run. If your floor is still in good shape but needs a lift and some TLC, polishing is a terrific alternative.

On the other hand, if your floor appears tired and worn, it may need to be sanded and refinished. This is when you or professional sand removes the old finish from the floor to apply a fresh stain or varnish.

Is it cheaper to refinish or replace hardwood floors?

Refinishing hardwood floors is almost always less expensive than replacing them. You’d be paying not only for the new wood, but also for the work of tearing out the old wood and hauling it away with the latter option.

Should hardwood floors feel rough after refinishing?

If the contractor sanded the floor three times with the right grits of sandpaper, polished the floor smooth, and applied at least two coats of finish, the hardwood floors should not feel rough after refinishing.

Can you refinish hardwood floors without sanding?

Without sanding, it’s impossible to refinish hardwood floors properly. The old finish, scratches, dings, and discolouration are all removed by sanding. Consider screening and recoating instead if your floors have a low sheen and only minor scuffing.

References:

  • Pillai MV, Van Engelhoven L, Kazerooni H. Evaluation of a Lower Leg Support Exoskeleton on Floor and Below Hip Height Panel Work. Human Factors. 2020;62(3):489-500. doi:10.1177/0018720820907752
  • McElroy, Frank S., and George R. McCormack. “Injury Rates in Construction Occupations, 1948.” Monthly Labor Review, vol. 70, no. 4, 1950, pp. 387–389. JSTOR, www.jstor.org/stable/41832016. Accessed 13 July 2021.
  • Azaroff LS, Doan T, Nguyen H, Goldstein-Gelb M, Fraser-Cook M, Kota S. Protecting Workers and Residents from Wood Floor-Finishing Hazards. NEW SOLUTIONS: A Journal of Environmental and Occupational Health Policy. 2006;16(2):119-138. doi:10.2190/EYUH-QF8Y-5HGR-MN4E

Leave a Comment

Your email address will not be published. Required fields are marked *