One of the best things about wood flooring is that it looks good for a lifetime to keep up with relatively little effort. Polished wooden floor sanding is the perfect way to protect the wood and add an attractive sheen. There are two main types of polish to choose from and they are in one step or two steps. One-step polishes are easier to use and produce a faster result, but there is no getting away from the fact that two-stage polishing produces harder, longer-lasting results.
Guidelines for floor sanding and polishing.
Make room. The same as any major cleaning exercise, if you polish your hardwood floor sanding Brisbane it is best if you can clean the room of all furniture and carpets. This will give you room to work and help avoid the need to furnish heavy drag around the room, which may cause damage to areas just polished. If it is not possible to delete the whole environment, for example. If your furniture is too large to remove, or you do not have space to move it too, at the very least, try to work the room into two parts. In order to do this, move everything aside and polish the clear area and then change again.
Clean your floor of dust and debris. Before you can polish the floor, you need to make sure it is clean. The first step to getting your floor is spotless, sweeping with a soft broom or vacuum. This process will help collect dust and dirt that could cause damage if left on the ground during the polishing process. Be sure to get in all the nooks and pay special attention along baseboards to ensure that the maximum amount of dust is removed.
Wash and dry your floor. The next part of the process involves removing all dirty marks on your floor. To do this, use a damp, not wet mop, with or without a wood floor cleaner, depending on how dirty your floor is. Once you’ve cleaned thoroughly or let dry naturally, or, if pressed, dry with a mop or a dry cloth.
If you choose to polish in one-step … you must follow the lacquer manufacturer’s instructions exactly on how to apply the polish, but the most important principles are:
- To start with a small pool size of a varnish hand, you used to coat your applicator.
- After your applicator is coated, you have to start working in the corner of the room, always pour a small pond, a hand-sized paint directly onto the floor and work on the long arm in the direction of the grain.
- Every time you move to the next section, be sure to allow overlap slightly, otherwise you risk having gaps in your paint.
- Once you’ve covered the entire floor, allow it to dry, each manufacturer will tell you exactly how long this will take, but usually it should last between half an hour and an hour. By using this method, there is no need for buffing.
If you choose a two-step polishing process… again, you should carefully read the manufacturer’s instructions, but basically this is what you should expect to do:
- Apply a paste of paint with a soft cloth, working in the room, again starting at the corner so you do not have to walk in the area that you have completed. TOP TIP: Parts of just over one meter are both workable and affordable.
- Once you have left your section dry floor wax (according to the manufacturer’s instructions), you begin to look white and now is the time to start polishing.
- Ideally, use an electric floor buffer with a polishing head to polish your floor. This will not only be easier to polish by hand, but will provide a more uniform result.
- Continue this process until you have completed the entire plant.